Gearshift lever and axial
Check
Check whether the rod gearshift control lever is flexible, and noise.
If the operation of the lever is difficult, please lubricate it according to the following
requirements.
Use chassis control rod with waterproof grease for lubrication of bearings and shaft sleeve.
8
．
Final check
Warning
For road tests, in order to avoid any incidents, please choose road with no passerby and
vehicles.
Doors
Check whether all the doors can be opened and closed easily or not, whether the lock can be locked solidly.
Seats
Checks whether the seat backrest adjustment devices could be locked at any angle.
Safety belt
Check the safety belt (include reinforced plate, agraffe and fixing device) to see whether it is broken or tore.
Check the safe belt to see whether it can be locked tightly.
Check the level of electrolyte in battery.
Check whether all units’ electrolyte level in battery is between the highest and lowest mark. If the battery
have inside indicators, we can check the state of the battery through indicators.
Operation of the accelerating pedal
Check whether the accelerating pedal is flexible, and make sure it is not locked or interfered with other parts.
Start-up the engine
Check the condition of starting the engine
Warning:
Before checking the following items, there must be enough room to ensure stopping braking and pedal
braking. Do not trample the accelerating pedal. If the engine started, should switch off the ignition devices
immediately. Adopting these preventive measures is to avoid injury or property damage.
For example: Front door
