(a)
；
55 N·m
(b)
：
65 N·m
(c)：95N
·
m
3.Front Strut Assy3．
Disassemble it as follows :
1). Remove the negative from the battery.
2)Jack the vehiecle.
3)Remove the tyres.
4)Remove the E-ring which is used to fix the brake pipe,
loose down the pipe from the bracket as shown from the
illustration.
5)Loose the bolt of caliper and slant the caliper as shown
in
the illustration.
6)Remove the bolt of wiring harness for the speed sensor.
7)Loose the bolt of bracket.
8)Loose the bolt of support unit, and hold it with care in case of damage.
9)Remove the strut assy.
Fixing
1)It is reverse order of disassembly 1)-9). Fix a screw in the position shown from the
illustration.
2)Tighten all the bolts and screws according to the described torque.
Torque
(a)
；
73 N·m
(b)
：
95 N·m
(c)
：
35 N·m
4.Hub And Spiaral Pole
Disassembly
1)Lift the vehiecle and remove the wheels.
2)Remove the axis cover as shown from the illustration( Knock the cover properly for three times.
Don’t spoil or distort the seat of the cover).
3)Loose the nuts of the axis.
4)Remove them.
5)Loose down the nuts of caliper bracker.
6)Remove the caliper together with the bracket.
Attention:
Hang the removed caliper with metal hook to avoid damage against the brake pipe.
Don’t match the brake pedal when the brake pads are removed.
7)Remove the brake disk with two bolts of 8mm.
8)Remove the wheel-hub with special tools.
