Attention:
The tensility regulation is, when replacing a new strap: press at the middle, a 7-10mm sink
Water pump strap replacing
1) Cutting off the cathode of the battery.
2) Remove the compressor transmission strap, if air conditioner is available(details please as per driving strap of
air conditioner compressor)
3) Replacing water pump strap with a new one.
4) Regulating the strap tensility according to instruction.
5) Turning on the battery cathode.
Check air conditioner compressing transmission strap.
Check wearing, scathe and tensility of the strap. Replacing or adjusting when needed.
Check air conditioner compressing transmission strap.
Check wearing, scathe and tensility of the strap. Replacing or adjusting when needed.
The tensility of air conditioner’s transmission strap:
Pressing at the middle with a 10kg force, there will be a 8-11mm sink.
Replacing air conditioner’s compressing transmission strap
1) Cut the cathode of the battery.
2) Release the strain of the old belt, and change the new one instead.
3) Change the pump belt by the new belt.
4) Adjust the strain of the belt according to the demand of technology.
5) Connect the cathode of the accumulator.
Notice:
When we change the new belt, the strain should be adjusted to: press the middle heavily, there will be a
8-9mm sink.
The timing belt of camshaft
Check
1) Put off the inspection port plug from the timing belt.
2) Examine the abrasion, crack, hurt, oil stain of the timing belt
with lamp and appropriative mirror according stipulation.
3) Install the inspection port plug.
The gap of valve
Check
1) Unload the crankcase soft pipe on the cover of the cylinder, and the warmer soft pipe
2) Unload the cover of the cylinder head.
3) Check the gap of the intake and exhaust valve, and if need, adjust it.
See the second chapter to check it.
1.
Pully of camshaft
2.
Adjusting bolt.
3.
Valve rod
4.
Locking nut for adjusting bolt.
