Docomo Prime SH-06A, Instruction Manual

Page: 484 / 589

482
e22_dv65_7e.fm
[482/520]
Ap
pe
nd
ix
/T
ro
ub
le
sh
o
o
ti
ng
■ Calling
■
Screen
Optical TOUCH CRUISER does not function properly
Operate just as covering the whole operating range of the
Optical TOUCH CRUISER with finger.
P. 34
Turn the FOMA terminal off, and then turn it on again. P. 55
FOMA card does not recognize
Is a FOMA card inserted facing right direction? P. 46
Calls cannot be made with the dial
Make sure All lock is not set. P. 119
Make sure Keypad dial lock is not set. P. 123
Make sure Self mode is not set. P. 121
Ring tone does not sound
Make sure phone ring volume is not set to [Silent]. P. 97
Make sure Public mode (Drive mode), Manner mode, or Self
mode is not set. P. 75
P. 100
P. 121
Make sure Accept calls/Reject calls, Reject calls by reason of
non-disclosure, Set mute ring time, or Reject unknown is not
set. P. 125
P. 126
P. 127
Make sure ringing time for Voice Mail Service or Call
Forwarding Service is not set to “0 seconds”. P. 418
P. 421
Make sure Answering duration is not set to “0 seconds”. P. 77
Make sure receive time for Auto answer setting is not set to “0
seconds”.
P. 395
Connection cannot be made (Example: [
A
] does not disappear even
after moving to another place, or calls cannot be made/received even
though signal status is not bad)
Turn the power on again, or insert the battery pack or FOMA
card again. P. 46
P. 49
P. 55
Depending on the signal type, even though status is “inside the
service area” or “[
]
] (indicating signal status) appears”,
making/receiving a call may not be available. Move to another
place and call again.
P. 29
Make sure Accept calls/Reject calls is not set. P. 125
In crowded place, heavy telephone/mail traffic may be caused
and makes it difficult to get a connection. In such case, [Please
wait] appears and a busy signal is played. Move to another
place or call again later.
–
Calls cannot be made with 2-touch dialing
Make sure Function lock is not set to the Phonebook. P. 121
Make sure All lock is not set. P. 119
Calls cannot be made from the FOMA terminal with the external
device such as car navigation or hands-free device connected
Call may not connect to the number if making multiple calls in
the condition that the other party does not answer or outside
the service area. In this case, turn off the FOMA terminal power
and restart.
P. 55
Display is dark
Make sure Eco mode (Power saver) is not set in Light/Power
saver setting, or Display light time is not set short in Original
Eco mode.
P. 105
Make sure Normal (auto bright) is not set in Light/Power saver
setting, or [Automatic] is not set for Brightness in Original Eco
mode. Brightness of the display varies depending on the
surrounding light if [Automatic] is set.
P. 105
Make sure setting for Control by scene in Display image quality
is not set to [ON].
P. 112
Make sure brightness adjustment in image quality setting for
1Seg is not set to [Automatic].
P. 242
Make sure VeilView is not set. P. 114
Display is blank
Make sure the FOMA terminal is not turned off. P. 55
Make sure the battery has not run out. P. 54
The display is turned off if the FOMA terminal is not in use for a
set length of time. Change the display time in Screen dsp time
of the Original Eco mode in the Light/Power saver.
P. 106
Make sure Auto power OFF is not set. P. 378
dv65_E.book 482 ページ ２００９年５月７日 木曜日 午前９時３分