Docomo Prime SH-06A, Instruction Manual, Page: 428 / 589

426
e19_dv65_7e.fm
[426/432]
Ne
twork Serv
ice
s
1
In the Custom menu, select [Settings]
/
[Other NW
Services]
/
[Multi number].
2
Select the service.
;
Select [Set multi number]
/
select a phone number to use
/ t /
[Yes].
• Set a phone number to use.
;
Select [Check setting].
;
Select [Number setting]
/
[Additional No1]/[Additional No2]
/
enter a name
/ t /
enter a phone number
/ t /
select a ring
tone
/ i
.
• Register Multi Numbers.
• Enter up to 14 single-byte (7 double-byte) characters for a name,
and 27 digits for a phone number.
■ Submenu operations for phone number setting screen
[Edit]
/
edit a Multi Number
Editing procedures are the same as when saving.
[Delete]
/
[Yes]
1
In stand-by, enter a phone number
/ C /
[Sel Multi
number].
2
Select a phone number to use
/ t / s
(Phone)/
i
(V.phone).
2in1 is a service that two phone numbers and two mail addresses
can be used on one mobile phone with dedicated mode function
as if two different mobile phones were used.
Packet transmission is available even in the B mode if i-mode is
subscribed.
For details on using functions in each mode
n
P. 429
When a call/transmission is made from an external device with 64K data
communication, Number A is used when 2in1 mode is set to [A mode]/
[Dual mode]. Number B is used when 2in1 mode is set to [B mode].
However, if Redial is performed with the AT command when [Dual mode]
is set, Redial is performed with the last dialed number.
Refer to “Mobile Phone User’s Guide [2in1]” for details on 2in1.
1
In the Custom menu, select [Settings]
/
[NW
Services]
/
[2in1 setting].
2
Enter the terminal security code
/ t
.
:
When the 2in1 has already been used, the 2in1 setting menu screen
appears.
3
Select [Yes].
Using a service
Calling from selected phone number
<Sel Multi number>
2in1
Using 2in1
A mode Available operations are calling from your phone number
(Number A), sending/receiving i-mode mail (Address A) and
viewing related information.
B mode Available operations are calling from the 2in1 phone number
(Number B), sending/receiving i-mode mail (Address B) and
viewing related information.
Dual mode Available operations are those of both the A and B modes.
Starting to use 2in1
<2in1 setting>
dv65_E.book 426 ページ ２００９年５月７日 木曜日 午前９時３分