Docomo Prime SH-06A, Instruction Manual, Page: 396 / 589

394
e17_dv65_7e.fm
[394/404]
Con
v
en
ie
nt Fu
nc
tio
n
s
1
In the Custom menu, select [LifeKit]
/
[Text memo].
2
Select a text memo
/ C /
[Edit].
3
Edit the text memo
/ i
.
:
Editing procedures are the same as when saving (
n
P. 393).
4
Select the saving method.
;
Select [Save new].
;
Select [Overwrite]
/
[Yes].
Connect a Stereo Earphone Set 01 (sold separately), etc. to call or
answer by pressing a switch.
Do not forcefully pull the external connector terminal cover. May damage
the cover.
Key/Touch sound and Standby i-motion are heard from the Stereo
Earphone Set when connected.
The volume for the earphone is the same as set in Received call volume
(
n
P. 97).
Do not press the switch repeatedly. Calls may be made and received
automatically.
Do not wind the cord of the Stereo Earphone Set around the FOMA
terminal. The internal antenna may not work properly.
Placing the cord of the Stereo Earphone Set near the internal antenna
may cause noise.
Secure plug. Sound may not be audible if not completely inserted.
A beep sounds when the plug is inserted only halfway during a call. This
is not a malfunction.
A pop may sound when the power is turned on or the handset is
operated. This is not a malfunction.
Set the Stereo Earphone Set to enable voice calls using only the switch.
Save phone numbers to the FOMA terminal handset phonebook in advance
and specify a memory number.
When a Bluetooth device is connected using the Headset service, the
Headset switch to call is followed.
Save one entry from memory numbers 000 to 999 from the FOMA
terminal handset phonebook.
1
In the Custom menu, select [Settings]
/
[Phone
settings]
/
[Headset sw to call]
/
[Voice call].
2
Enter the memory number
/ t
.
Connect the Stereo Earphone Set in advance.
■ Making a call to a memory number specified for Headset
switch to call
1
In stand-by, press the switch for 2+ seconds.
:
When the screen is off due to the screen display time, press a key or
the switch to show the screen.
2
Press the switch for 2+ seconds to finish call.
■
Making a call after entering a phone number
1
In stand-by, enter a phone number
/
press the switch
for 2+ seconds.
:
Call can also be made from phonebook and Redials/Received calls.
2
Press the switch for 2+ seconds to finish call.
Editing memos
Earphone/Microphone with switch
Using earphone/microphone with
switch
Setting operation of earphone/microphone with
switch
<Headset sw to call>
Making a voice call with switch
If multiple phone numbers are saved to memory numbers set in
Headset switch to call, the first phone number saved is called.
When a memory number set for Headset switch to call is set as Secret,
set Secret mode to [ON] before using switch to call.
dv65_E.book 394 ページ ２００９年５月７日 木曜日 午前９時３分