Docomo Prime SH-06A, Instruction Manual, Page: 41 / 589

e02_dv65_7e.fm
[39/58]
39
Continued on next page
Be
fore
Us
ing
the
H
andset
In the viewer position, operate by putting the finger on the touch
panel (screen) instead of using the Multi-guide key and dial key in
the normal position.
This manual describes the key operation instead of touch panel
operation when both operations are available. The following explains
basic operations for touch panel.
The following range is available to operate with touch panel (Operating
range differs depending on the function).
When the screen is off, press
&
to display the screen and perform the
touch operation.
The message stating that the operation is not available appears when
the touch panel cannot be used.
Even in the normal position, the touch panel is available when using
Writing authentication (
n
P. 117), Face first AF in AF mode (
n
P. 223)
and Chase focus (
n
P. 224).
The following shows the operation and its main purpose in the viewer
position, and example key operation which fulfills the same function in the
normal position.
Touch panel
Operations in viewer position
Operating range of the touch panel
When using the touch panel
The touch panel is designed to lightly touch with the finger. Do not
forcefully press with the finger, or press with a pointed object
(fingernail, ballpoint pen, pin, etc.).
In the following cases, the touch panel may not work even if it is
touched. May cause a malfunction.
Operation with a gloved finger
Operation with a fingernail
Operation with foreign objects placed on the operation pad
Operation on the touch panel on which a protective sheet or a
sticker is put
Basic operation in viewer position
Operation Purpose
Example in the
normal
position
Touch
Put the finger on the
touch panel and put it
off.
Select/OK
Touch the key displayed
in the screen.
t
Move the cursor and
select
For a list screen, touch
the object to point the
cursor and touch again.
w / t
dv65_E.book 39 ページ ２００９年５月７日 木曜日 午前９時３分