Docomo Prime SH-06A, Instruction Manual, Page: 488 / 589

486
e22_dv65_7e.fm
[486/520]
Ap
pe
nd
ix
/T
ro
ub
le
sh
o
o
ti
ng
[Authentication canceled]
Appears when [Cancel] is selected or
c
is pressed in the
authentication screen for sites or Internet web pages (screen to enter ID
and password).
[Authentication failed. Retry?]
Appears when Ir communication was not properly performed. Select
[Yes] to try again.
n
P. 362
[Authentication type is not supported (401)]
Appears when authentication is not possible.
Previous screen reappears.
[B number dialing is not available when using abroad. A number
dialing will be performed]
Appears if calling is attempted with Number B when the 2in1 is used
overseas. Select [Call] to call with Number A. Select [No ID dialing] to
call without sending ID.
n
P. 426
[Battery empty. Unsaved data will be lost. Ending current operation]
Appears if battery starts to run out. Charge the battery.
n
P. 50, P. 54
[Battery low]
Battery level is low. Camera mode cannot be activated. Use after fully
charging the battery.
n
P. 50
[Battery low. Unable to record anymore]
Appears when recording 1Seg video with insufficient battery.
[Battery too low. Please recharge and retry]
Appears when battery level is low while updating software. Recharge
battery to [
"
].
n
P. 50
[Bluetooth connection failed]
[Unable to connect to (service name)]
Appears when the connection to Bluetooth devices has failed.
n
P. 399
[Camera function is not available now]
Appears when activating main camera while main camera portion
becomes hot from being stored in a hot place. Use the camera after
letting it cool down.
May appear and end the camera due to functional limitations when a
call is received and others are performed while the camera shooting
screen is shown. In such cases, activate camera again.
May appear when the FOMA terminal is opened if the terminal is closed
immediately after the camera is activated from phonebook or mail.
Activate the camera again.
[Capacity exceeded. Some data may be lost. End editing?]
Appears when message text alone exceeds 10,000 bytes. Select [Yes]
to open the compose message screen. Excess data is deleted and [
y
]
appears. Depending on mail content (text, images, etc.), excess data
may not be deleted. To re-edit, select [No] and the message entry
screen reappears. Edit to 10,000 bytes or less.
[Certificate is rejected (tampered)]
Appears when rewritten SSL/TLS certificate is received. SSL/TLS
session cannot be performed with this site or Internet web page.
n
P. 171
[Cessation of broadcast]
Appears when the 1Seg program stops and broadcast waves cannot be
received.
The message may appear even if the 1Seg program is available
depending on the reception status of broadcast waves.
[Connecting with cable. Unable to switch to Data transfer mode]
Appears when using iC communication while charging or connecting
the earphone.
dv65_E.book 486 ページ ２００９年５月７日 木曜日 午前９時３分