Docomo Prime SH-06A, Instruction Manual, Page: 36 / 589

34
e02_dv65_7e.fm
[34/58]
Be
fore
Us
ing
the
H
andset
Display popup messages in the stand-by display
when information is received. Activate i-concier with
the popup messages to check information details.
1
In stand-by, a popup message appears
/ t
.
:
Alternatively, select the popup messages in the stand-by display with
Optical TOUCH CRUISER and press
t
to activate i-concier.
:
In the viewer position, touch the popup message and point the
cursor. Then touch again to activate i-concier.
2
Select the popup message
/ t
.
: The popup message disappears after activating i-concier.
Use the Optical TOUCH CRUISER to perform the same operations
as those for
w
of Multi-guide key (e.g. moving the cursor or
scrolling the screen) (Some operations may differ).
Move the pointer or cursor just as covering the whole operating range of
the Optical TOUCH CRUISER with finger.
The pointer or cursor moves in conjunction with sliding of the finger.
Activating i-concier with popup message
Calendar or Stand-by memo does not appear while a popup message
appears.
“ ひつじのしつじくん
®
”
©NTT DOCOMO
Optical TOUCH CRUISER
Depending on the screen, the Optical TOUCH CRUISER may not be
available.
Operating range of
Optical TOUCH
CRUISER
dv65_E.book 34 ページ ２００９年５月７日 木曜日 午前９時３分