Docomo Prime SH-06A, Instruction Manual, Page: 509 / 589

507
e22_dv65_7e.fm
[507/520]
Ap
pe
nd
ix
/T
ro
ub
le
sh
o
o
ti
ng
■ Displaying scanned results
Warning screens other than the above may appear depending on the
contents of pattern definitions.
■ Displaying detected errors
In the warning screen, select [Detail] to show error
names. When no error name exists for the
contents of the pattern data, [Detail] does not
appear.
Up to five error names appear. [Etc] appears
below the fifth error name when six or more are
detected. If same error is detected more than once, it is only listed once.
1
In the Custom menu, select
[Settings]
/
[General settings]
/
[Scanning function]
/
[Version].
Level 0
Displaying, activating, or calling
is available. Appears when
there was an error previously,
but there is no error presently.
Select [Agree] to display,
activate, or call.
Level 1
Select [No] to display, activate,
or call.
Select [Yes] to cancel the
operation.
Level 2
Displaying, activating, or calling
is not available. Select [Agree]
to end.
Level 3
Displaying, activating, or calling
is not available. Select [Yes]
and select [Yes] in the delete
confirmation screen to delete
the data. Select [No] to end
without deleting.
Level 4
Displaying, activating, or calling
is not available. Select [Agree]
to delete the data.
Checking version of pattern definitions
<Version>
dv65_E.book 507 ページ ２００９年５月７日 木曜日 午前９時３分