Docomo Prime SH-06A, Instruction Manual

Page: 120 / 589

118
e06_dv65_7e.fm
[118/132]
Security Settings
2
Select [Agree]
/
[Register symbol]
/
[Agree].
:
To change the registered symbols for the authentication: Select
[Register symbol]
/ [Overwrite] / [Agree].
:
To check the registered symbols for the authentication: Select
[Register symbol]
/
[Check saved data].
• To delete the symbols for the authentication: Press
i /
[Yes].
:
To check Error history: Select [Error history].
3
Handwrite characters/symbols on the text input part
/
t
.
:
Handwrite characters and symbols to be used for the authentication
on the text input part.
:
Handwrite a character or symbol with 2 to 12 strokes and within 3
seconds per stroke. Alternatively, divide them into multiple symbols
to register.
:
To delete the registered characters/symbols: Touch [
Q
] of the
control key.
:
To end registering symbols for the authentication: Touch [End] of the
control key.
4
Press
i /
[Agree].
1
In the Writing authentication screen, handwrite the
registered symbols for the authentication
/ t
.
:
Handwrite in the same stroke order as when registering.
:
To switch to the terminal security code entry: Touch [SecCode] of the
control key.
:
To delete the handwritten characters/symbols: Touch [
Q
] of the
control key.
:
To end Writing authentication: Touch [End] of the control key.
:
If the authentication is not successful, [Does not match registered
authentication data] appears.
• If Writing authentication is failed twice continuously, the terminal
security code entry screen appears.
1
In the Custom menu, select [Settings]
/
[Security]
/
[UIM Settings]
/
enter the terminal security code
/
t /
[PIN1 code input set].
2
Select the setting
/ t
.
3
Enter the PIN1 code
/ t
.
■
Entering PIN1 code at power on
Set the PIN1 code input set to [ON], and the PIN1 code entry screen
appears when the power is turned on.
1
In the PIN1 code entry screen, enter the PIN1 code
/
t
.
When the PIN1 code input set is set to [OFF], the PIN1 code cannot be
changed.
1
In the Custom menu, select [Settings]
/
[Security]
/
[UIM Settings]
/
enter the terminal security code
/ t
.
2
Select the PIN1 or PIN2 code
/ t
.
If the length of each stroke is insufficient, an accurate authentication
may not be performed.
Activating Writing authentication
Text input part
UIM Settings
Setting PIN code
Setting handset to require PIN1 code entry at
power on
<PIN1 code input set>
Changing PIN1/PIN2 code
<Change PIN1 code/PIN2 code>
dv65_E.book 118 ページ ２００９年５月７日 木曜日 午前９時３分