Docomo Prime SH-06A, Instruction Manual

Page: 383 / 589

381
e17_dv65_7e.fm
[381/404]
Con
v
en
ie
nt Fu
nc
tio
n
s
When the FOMA terminal is closed or in the viewer position, press
&
to
stop alarm (Snooze is activated).
• In the viewer position, press
&
to disable the snooze during snooze. Disable/Delete/Change alarm settings individually. When alarm is deleted,
its details are deleted as well. Details are retained when disabled. To use
the same details, set again.
1
In the Custom menu, select [LifeKit]
/
[Alarm].
2
Select a registration number
/
set to disable/delete/
change.
:
To disable/change: Press
i
.
:
To delete: Press
C /
[Yes].
Manage schedules by saving the date/time, subject, etc. In
addition, set alarms and display messages.
Set the correct date and time in advance (
n
P. 56).
Save up to 2,500 schedules.
Save schedules between January 1, 2000 and December 31, 2099.
When i-concier is subscribed, schedules are displayed on the schedule
by updating from the Data Storage Center or downloading from sites.
Edit the delivered schedule and save as a new entry.
With the schedule function, check saved schedules and the details of timers
for starting or recording 1Seg programs.
1
In the Custom menu, select [LifeKit]
/
[Classic
schedule].
:
To show previous month/next month: Press
m
/
a
.
The alarm is not activated when the set time arrives in the following
cases. Upon the end of the call or the operation, the previously
displayed screen or the stand-by display is returned, and the alarm is
activated.
During a call While receiving a mail
During Ir communication During packet transmission
During iC communication During Bluetooth communication
While using Infrared remote control
During microSD mode/MTP mode
While software is being updated *
During presentation assist
* When the set time arrives while the software is being updated, the
alarm may not be activated, even when the updating ends.
When a call is started during snooze, snooze notification is interrupted.
After the call ends, snooze notification resumes.
During snooze or while the alarm for which snooze is set is sounding,
other alarm/schedule alarm do not sound, even when the set times
arrive.
While Manner mode is set with vibration [ON], vibrator operates in
[Pattern1] even if vibrator is set to [OFF].
When a phonebook entry with Picture call applied is set as a
contact
The picture call image appears when the alarm is activated.
When i-motion is set to Picture call, the regular alarm screen appears.
When i-motion with image and voice is set as alarm tone, the i-motion
image takes priority.
When Alarm tone is set to [As Kisekae Tool], the Kisekae Tool setting is
prioritized.
When alarm time arrives while 1Seg is being watched
Multi Window appears in the normal position, and 1Seg is interrupted
and the alarm is activated in the viewer position. When alarm ends, the
handset returns to the status existing before the alarm was activated.
Disabling/Deleting/Changing alarm settings
Classic schedule
Managing schedules
Displaying calendar
<Calendar>
dv65_E.book 381 ページ ２００９年５月７日 木曜日 午前９時３分