Docomo N-03A, Instruction Manual

Page: 98 / 506

96
Sound/Screen/Ligh
t Settings
Missed info …… Sets whether a My Signal
animation will flash (at 10 second intervals) when
the icon for a missed call or a new mail (i-mode mail,
chat mail, Area Mail, SMS) appears on the display.
* When highlighting an item while selecting an
animation, the animation is displayed on My Signal for
about 15 seconds (6 seconds for Close display and
Clock display).
3 Set the respective items
X
o
(Finish)
■
My Signal settings
z When “Connection”, “Phone”, “Videophone”, “Mail/
Chat mail”, “Msg.R/Msg.F” and “Missed info” are
set to be displayed, the following incoming call
lamp functions are disabled when receiving each
item or during a call:
• “Illumination”
• “Illumination in talk”
• “Illumination” of “Ring tone/Image”
z When “My Signal settings” is set to “ON”, the
various animations are displayed during
communication (e.g. when using Osaifu-Keitai).
When set to “OFF”, the Communication indicator
lights/flashes as follows instead of My Signal.
• Data communication in progress/succeeded:
Lights/Flashes in respective colors
• Data acquisition/Data authentication failed:
Flashes in red
z If “My Signal settings” are set to “OFF”, the alarm
notification and the music player status are also not
displayed.
Setting the Flashing Mode of
the Incoming Call Lamp for
Incoming Calls
<Illumination>
You can set the color and pattern (flashing pattern)
with which the incoming call lamp flashes when you
receive voice/videophone calls, mail, chat mail or
MessageR/F.
z You can set different flashing colors respectively for
specific phone numbers, e-mail addresses and
groups. → P.78
z When setting “Phone”, “Videophone”, “Mail/
Chatmail”, “Msg.R/Msg.F”, or “Missed info” to be
displayed in “My Signal settings”, the respective
illumination for incoming calls or receiving mail
does not flash.
1
i
X
“Settings”
X
“Incoming call”
X
“Illumination”
X
Select any item:
Set color …… Selects the flash color of the incoming
call lamp from “Phone (voice phone)/Videophone/
Mail/Chat mail/MessageR/MessageF”.
When you switch the highlighted item while selecting
an item, the incoming call lamp lights up in the
highlighted color.
Color 1 to 6: The lamp flashes by the selected color.
Gradation: The lamp flashes by the colors of 1 to 6 in
the order.
When “Mail” is selected, the illumination for i-mode
mails and SMS is set.
Set pattern …… Selects the incoming call lamp
flashing pattern from “Standard/Melody linkage”.
o
and
p
also flashes in the same pattern.
Missed info …… Sets whether the incoming call
lamp will flash (at 5 second intervals) when the icon
for a missed call or new mail (i-mode mail, chat mail,
Area Mail and SMS) appears on the display (the
interval of flashing becomes longer in Power saver
mode).
N
z When multiple mails or MessageR/F are received at
the same time, the operation of My Signal becomes as
follows:
<My Signal Priority>
z When the My Signal settings are duplicated, the
priority is assigned as follows:
① My Signal setting for Ring tone/Image (for
individual)
② My Signal setting for Ring tone/Image (for group)
③ My Signal settings
Received contents Operation of My Signal
Multiple mails are
received The My Signal setting for the
last received mail is used. If
a chat mail is contained, the
My Signal setting for the chat
mail is used.
Mail and MessageR/
F are received at the
same time
N
z
If “Pattern 1 to 4” is set as the Ring tone, the incoming
call lamp flashes to the ring tone regardless of the
settings of this function.
z If “Melody linkage” is set and no vibration pattern is
stored for melody linkage in the ring tones, the
“Standard” pattern is used for Chaku-motion or
Chaku-Uta-Full
®
.
z
The incoming call lamp when Area Mail is received
flashes in color 5 (red), regardless of this setting.