Docomo N-03A, Instruction Manual

Page: 475 / 506

22
6
Select "FOMA N03A" from "
接続
方法
" (Connection method), and
click "OK"
Click " キャンセル " (Cancel) after the connection
screen appears.
If a COM port of "FOMA N03A" can be
selected
When Properties of the COM port is displayed,
click "OK".
In this example, "COM3" is selected. See
"Checking the COM port" (p.18) to confirm
the actual COM port number of "FOMA
N03A" to be selected in "
接続方法 "
(Connection method).
If a COM port of "FOMA N03A" cannot be
selected
Click " キャンセル " (Cancel) to close the " 接
続の設定 " (Connection Settings) screen and
then follow the steps below:
(1) Select "
ファイル " (File) menu → " プロパ
ティ " (Properties)
(2) Select "FOMA N03A" in the " 接続方法 "
(Connection method) column of the " 接続
の設定 " (Connection Settings) tab on the
"sample のプロパティ " (sample
Properties) screen
(3) Uncheck " 国 / 地域番号と市外局番を使
う " (Use the Country/Region Code and
Area Code)
(4) Click "OK"
7
Enter the access point (APN) and
press
Enter in the format of AT+CGDCONT=<cid>,
"PDP_type", "APN"
<cid>
： Enter any number from 2 or between 4
and 10.
Please be cautious because if cid has been
already set, the setting will be overwritten.
"PDP_type"
： Enter "PPP" or "IP".
"APN" ： Put " " around the access point (APN)
to enter.
If "OK" is displayed, the settings for the access
point (APN) are completed.
Example: To enter APN named XXX.abc in cid
Number2
Enter AT+CGDCONT=2,"PPP","XXX.abc" .
8
Confirm that "OK" appears and click "
ハイパーターミナルの終了
" (Close
Hyper terminal) in the "
ファイル
" (File) menu
""sample"
と名前付けされた接続を保存しますか？
" (Are you going to save the connection "sample"?)
appears, but it is not necessary to save.