Docomo N-03A, Instruction Manual

Page: 205 / 506

203 Continued on next page
Camer
a
Changing the Shooting
Settings
You can change the camera settings such as the
zoom or Auto timer.
Using the zoom
Using the zoom enables you to adjust the image
being shot to your desired size.
z
The zoom is digital.
1 Each shooting screen
X
Use
v
to
adjust the zoom
The image is zoomed in/out by one step each
time you press
v
, and hold down it to zoom in/
out continuously.
■ Maximum zoom rate for each image size (16
levels)
Using the auto timer
z
The Auto timer is reset to “OFF” each time you
finish shooting.
1 Each shooting screen
X
u
(FUNC)
X
“Auto timer”
X
“ON”
X
Enter the time for
the Auto timer (01 to 15 seconds in 2
digits)
“10 seconds” is the default setting.
● If you set the Auto timer
“ ” appears on the screen to indicate that the Auto
timer is set.
Pressing
d
(Record) plays the Auto timer tone and
the Auto timer starts.
The Shooting indicator flashes in green and “ ” on
the screen and the backlight of
op
keys also flash.
The countdown tone sounds about 5 seconds before
the shooting. The incoming call lamp flashes rapidly.
■ To cancel the Auto timer settings
X
u
(FUNC) X “Auto timer” X “OFF”
■ To stop the timer while it is running
X
o
(Quit) or
t
Using the Bar Code Reader
<Bar code reader>
The FOMA terminal can scan JAN codes and QR
codes using the camera. The scanned data can be
used for displaying/copying the text, using the
functions of Phone To/AV Phone To, Mail To, Web To,
i-
α
ppli To, or adding to bookmark/phonebook
especially in QR code. The FOMA terminal can also
scan the image, melody or ToruCa data to play or
save.
z The FOMA terminal can save up to 5 scanned bar
codes.
z Hold the FOMA terminal firmly to ensure that it
does not shake during the scanning.
z
When scanning bar codes, use the camera and
hold the FOMA terminal about 6 to 8 cm away from
the scanned code.
■ JAN codes and QR codes
z
JAN code
A bar code consisting of
vertical lines (bars) of
various widths and
spaces to represent
numbers. The FOMA terminal can scan 8-digit
(JAN8) and 13-digit (JAN13) bar codes.
* When the FOMA terminal scans the JAN code on the
right above, it is displayed as “4942857113068”.
N
z “1×” is the default setting when you launch the
camera. Changing the image size or camera mode
also changes the zoom to “1×”.
Image size
Shoot still
image
Movie mode
2M/1M
― ―
VGA Approx. 1.8×
―
CIF Approx. 1.7×
―
Screen Approx. 1.8×
―
QVGA V. Approx. 2.4×
―
QVGA
―
Approx. 1.8×
QCIF Approx. 3.3× Approx. 3.3×
SubQCIF Approx. 4.6× Approx. 4.6×
N
z During the Auto timer countdown, you can shoot
manually by pressing
d
(Record).
z
The Auto timer cannot be used in M-Continuous
shooting.