Docomo N-03A, Instruction Manual

Page: 367 / 506

365 Continued on next page
PC Connection
Notice before using
Internet service provider fees
In addition to FOMA service charges, you may
need to pay user fees to an Internet service
provider to use the Internet. These fees must be
paid directly to the Internet service provider in
addition to service fees of FOMA service. Contact
your Internet service provider for details.
DOCOMO Internet connection service “mopera
U” is available. “mopera U” is a pay service for
which you need to apply.
Setting an access point (e.g. Internet
service provider)
Packet communication and 64K data
communication use different access points. If you
are using packet communication, use an
applicable access point for it; if 64K data
communication, use an access point for FOMA
64K data communication or ISDN synchronized
64K.
• You cannot use DoPa access points.
• Visit mopera's website at http://www.mopera.net/
mopera/index.html for more details on service and
the connection method.
Before Using
Operational environment
The PC operation environment to use data
communication is as shown below:
*1: Operations after the OS upgrade are not covered by the
warranty.
*2: For DOCOMO Connection Manager, Windows 2000
Service Pack 4 or later, Windows XP Service Pack 2 or
later (Refer to the DOCOMO web site for operational
environment details.)
*3: This may differ depending on the PC's system
configuration.
*4: DOCOMO Connection Manager: 15M bytes or more
available memory
Required devices
The following hardware and software, in addition to
the FOMA terminal and a PC, are required.
• FOMA USB Cable with Charge Function 01/02
(optional) or FOMA USB Cable (optional)
• Bundled CD-ROM “CD-ROM for N-03A”
Checking the Procedure
In data communication, the connection is made
through a dial-up connection with Internet service
providers or LANs that support FOMA data
communication.
■ About the software provided in the provided “CD-
ROM for N-03A”
z The CD-ROM contains the N-03A Communication
setting file (drivers), DOCOMO Connection
Manager and FirstPass PC software.
z The FOMA Communication setting file is a software
(driver) required for connecting the FOMA terminal
with a PC via the FOMA USB Cable with Charge
Function 01/02 (optional) to carry out packet
communication, 64K data communication or data
transfer (OBEX
TM
communication). Installing the
FOMA Communication setting file embeds each
driver into Windows.
Item Description
PC unit • PC/AT compatible model with CD-ROM
drive
• USBUSB port (compliant to Universal
Serial Bus Specification Rev1.1)
• Display resolution of 800 dots wide ×
600 dots high, High Color (65,536
colors) is recommended
OS
*1
• Windows 2000, Windows XP, Windows
Vista (Japanese versions)
*2
Required
memory
*3
• Windows 2000: 64M bytes or more
• Windows XP: 128M bytes or more
• Windows Vista: 512M bytes or more
Hard disk
space
*3
• 5M bytes or more
*4
N
z You can transmit data with the FOMA terminal
connected to the DOCOMO PDA “musea” or
“sigmarion
Ⅲ
”. Update “musea” to connect them to the
FOMA terminal. For how to update it and other details,
visit the DOCOMO website.
z The FOMA terminal is not compatible with Remote
Wakeup function.
z The FOMA terminal is not compatible with the FAX
communication.
N
z
Purchase the specified “FOMA USB Cable with
Charge Function 01
/02” or “FOMA USB Cable”. The
USB cable for PC cannot be used because the shape
of the connector is different.
z USB HUB may not function correctly.