Docomo N-03A, Instruction Manual

Page: 181 / 506

179
i-mode/i-motion/i-Ch
annel
Setting a host different from i-mode
host (ISP connection)
<Host selection>
You need to select a different host when you want to
use a service other than i-mode. If you change the
host to a host other than i-mode, you can not use
i-mode and i-mode mail.
z
You can store up to 10 hosts other than “i-mode”.
1
i
X
“Settings”
X
“Connection
setting” X “Host selection” X Highlight
“<Not recorded>” X
o
(Edit) X Enter
your security code
X
Select any item:
Host name
……
Sets the host name. You can enter
up to 9 double-byte or 18 single-byte characters.
Host number …… Sets the host number. You can
enter up to 99 single-byte characters.
Host address
……
Sets the host address. You can
enter up to 30 single-byte characters.
Host address2 …… Sets the host address2. You can
enter up to 30 single-byte characters.
2 Set the respective items X
o
(Finish)
Specifying whether to use terminal
data in Flash movies
<Use phone information>
Use this function to specify whether terminal data is
used when a Flash movie is running.
z
The terminal data may be used depending on the
particular Flash movie. Select “Accept” in “Use
phone information” of “i-mode settings” so that
images use the terminal data. The default setting is
“Accept”. Such movies may use the following types
of terminal data:
• Battery level • Ring volume setting
• Signal strength • Select language
• Date and time • Model data
1 i-mode settings screen (P.178) X “Use
phone information” X “Accept” or
“Reject”
Using SSL Certificates
You can check the details of an SSL certificate or to
set to valid/invalid.
1
i
X
“Settings”
X
“Connection
setting”
X
“Certificate”
2 Select a certificate
X
Check the details
■
To validate or invalidate SSL certificates
X Highlight a certificate X
u
(FUNC) X “Valid/
Invalid”
* There is normally no need to change this
setting.
N
z Note that costs of packet communication while you are
connected to a host other than i-mode are not covered
by the Pake-Houdai, Pake-Houdai full, or Pake-Houdai
double deals.
z
When you change the host, the ticker of i-Channel is
turned off. The ticker is turned on again automatically
when the information is updated automatically or
when
u
is pressed to receive the latest information.
z After changing the host, the i-Channel information
may not be updated automatically. To receive the
latest information, press
u
to display the channel list
screen.
N
z
When set to “Valid”, “ ” appears. When set to
“Invalid”, “ ” appears.
z
If you select “Invalid”, you cannot view SSL pages with
that SSL certificate.