Docomo N-03A, Instruction Manual

Page: 413 / 506

411 Continued on next page
Appe
ndix/T
roub
leshooti
ng
Setting the scanning function
<Set scan>
When the Scanning function is set to “ON”, data and programs are automatically checked when they
are executed.
When the message scan is set to “ON”, the message body of SMS is automatically checked.
1
i
X “Settings” X “Lock/Security” X “Scanning function”
The “Scanning function screen” appears.
2
“Set scan”
X
“Scan” or “Message scan”
X
“ON”
■
If a message appears asking whether to change the settings
X “YES”
* If you enable the Scanning function and it detects potentially harmful data, the event is displayed
using one of 5 warning levels. → P.412
Updating pattern data
<Pattern data update>
1
Scanning function screen (P.411) X “Update” X “YES” X “YES”
* If no pattern data update is required, the “Pattern definitions are up-to-date” message appears.
Continue using your current pattern data.
Updating pattern data automatically
<Set auto-update>
1
Scanning function screen (P.411) X “Set auto-update” X “ON” X “YES” X “YES”
The scanning results display
■ Displaying problems detected by scanning
A list of up to 5 problems detected by the Scanning function is displayed, starting with
the highest-level problem. If 6 or more problems were detected, the names of the 6th
and subsequent problems are omitted.
The rest of the problem elements (sixth and later), of which names are omitted, are
displayed as follows:
1 to 9998: The remaining count is displayed as it is.
9999 or more: “Other:9999” is displayed regardless of the count.
N
z The Voice mail notification is not checked even when “Message scan” is set to “ON”.
N
z
You cannot update the pattern data when the update information is notified from the network, when other function is
activated, or during i-mode communication, packet communication or international roaming.
Scanning function
Ｆｏｌｌｏｗｉｎｇ ｐｒｏｂｌｅｍｓ
ｗｅｒｅ ｄｅｔｅｃｔｅｄ
Ｐｒｏｂｌｅｍ ｅｌｅｍｅｎｔ１
Ｐｒｏｂｌｅｍ ｅｌｅｍｅｎｔ２
Ｐｒｏｂｌｅｍ ｅｌｅｍｅｎｔ３
Ｐｒｏｂｌｅｍ ｅｌｅｍｅｎｔ４
Ｐｒｏｂｌｅｍ ｅｌｅｍｅｎｔ５
Ｏｔｈｅｒ：ｘｘｘｘ
Ｒｅｔｕｒｎ