Docomo N-03A, Instruction Manual

Page: 50 / 506

48
V
o
ice/Videophone Ca
lls
Enter phone number screen
(P.46)
Notify Caller ID → P.56
Prefix numbers → P.58
Chaku-moji → P.55
Int’l call
→
P.51
Multi Number → P.348
Add to phonebook
→
P.72
Compose message
*
→ P.128
Select image
……
Selects the substitute image used
during a videophone call from Chara-den.
Select “Release settings” to cancel the setting.
* : Not available when 2in1 is in B mode.
Videophone in-call screen
(P.46)
Substitute image ⇔ camera image …… Switches
between the camera image and the substitute image.
Change main disp.
……
Changes the main display.
The screen changes in the order of “Displaying the image
from the other party’s camera on your main screen.”
→
“Displaying the image from your own camera on your
main screen.”
→
“Displaying only the image from the other
party’s camera.”
→
“Displaying only the image from your
own camera.”
V.phone settings …… Sets the screen for videophone
call.
Visual prefer. …… Sets the image sent to and
received from the other party from “Normal/Prefer
img qual/Prefer motion spd”.
This setting is only retained during the call.
Brightness …… Five brightness levels (-2 to 0 to +2)
are available.
White balance …… Sets image color tones. → P.197
This setting is also applied to the equivalent camera
functions.
Color mode set …… Selects the image effect from
“Normal/Sepia/Monochrome”.
This setting is only retained during the call.
Photo mode …… Sets modes suited to the scene
being shot. → P.197
Chara-den set. …… You can set the followings when
Chara-den is used. This setting cannot be set for the
camera images.
Switch Chara-den …… Selects the character to be
displayed.
Action List …… Checks the available actions and
the corresponding keys. You can also view the action
list by pressing
w
.
Change Action …… Changes the Action mode.
Switch image …… Displays the still image selected
in “Substitute image” (P.67) on the other party’s
display.
Display light …… Sets lighting of backlight.
All time ON (default) …… Turns the backlight on all
the time.
Same as backlight
……
Lights according to the time
set for “Lighting” in “Backlight”.
Own number …… Displays your phone number during a
videophone call.
Send DTMF tone
⇔
DTMF tone OFF
……
Sets/cancels
push signal transmission mode during Chara-den.
Except for Chara-den, videophone calls are always in
push signal transmission mode.
Change to voice → P.49
●
If a videophone call is not connected
When a videophone call is not connected, the cause
of the failure appears.
z
The cause may not appear depending on the
situation.
z Depending on the type of other party’s phone or the
possible lack of a network service subscription, the
reason may not accurately reflect the other party’s
actual status.
Display Cause
Check number then
redial The called phone number is not
used
Busy The line is busy
• This message may also
appear during packet
communication.
Busy with packet
transmission The other party is using packet
communication
Out of service area/
power off The other party is out of service
area or the phone is turned off
Your call is being
forwarded The call is being forwarded (A
Videophone call is made when
the forwarding number is for a
3G-324M-compatible
videophone)
Redial using voice
call The phone for the forwarding
number is not compatible with
videophone calls
Please activate
caller ID before
dialing again The other party sets the Caller
ID request service