Dobot Magician Lite User Manual Download

Page: 2 / 72

Dobot Magician Lite User Guide

Issue V1.9.1 (2020-01-11)

User Guide

No part of this document may be reproduced or transmitted in any form or by any means

without prior written consent of Yuejiang Technology Co., Ltd

Disclaimer

To the maximum extent permitted by applicable law, the products described (including its

hardware, software and firmware, etc.) in this document are provided

AS IS

, which may have flaws,

errors or faults. Yuejiang makes no warranties of any kind, express or implied, including but not

limited to, merchantability, satisfaction of quality, fitness for a particular purpose and non-

infringement of third party rights. In no event will Yuejiang be liable for any special, incidental,

consequential or indirect damages resulting from the use of our products and documents.

Before using our product, please thoroughly read and understand the contents of this document

and related technical documents that are published online, to ensure that the robotic arm is used on

the premise of fully understanding the robotic arm and related knowledge. Please use this document

with technical guidance from professionals. Even if follow this document or any other related

instructions, Damages or losses will be happen in the using process, Dobot shall not be considered

as a guarantee regarding to all security information contained in this document.

The user has the responsibility to make sure following the relevant practical laws and

regulations of the country, in order that there is no significant danger in the use of the robotic arm.

Shenzhen Yuejiang Technology Co., Ltd

Address: Floor 9-10, Building 2, Chongwen Garden, Nanshan iPark, Liuxian Blvd, Nanshan

District, Shenzhen, Guangdong Province, China

Website:

www.dobot.cc

Summary of Contents for Magician Lite









































































Search results

Summary of Contents for Magician Lite

Reviews:

Related manuals for Magician Lite

Brands by name

Popular brands

Dobot Magician Lite, User Manual

Search results

Summary of Contents for Magician Lite

Reviews:

Related manuals for Magician Lite

Brands by name

Popular brands