Dobot Magician Lite User Manual Download

Page: 11 / 72

Dobot Magician Lite User Guide

Quick Start

Issue V1.9.1 (2020-01-11)

User Guide

Figure 2.6 Connect power adaptor

Installing the DobotStudio

You can control Magician Lite and Magic Box by DobotStudio

（

V1.9.1 and above

）

implement functions such as Teaching & Playback, fully programmable applications. This topic

introduces Teaching & Playback.

System Requirements

The DobotStudio supports the following Windows versions:

Windows 7, Windows 8, and Windows 10 (This manual is explained based on this version)

Obtaining the DobotStudio Package

Before using Magician Lite, download the Windows DobotStudio package from

https://www.dobot.cc/downloadcenter/dobot-magician-lite.html#most-download

Installing the DobotStudio

Prerequisites

The DobotStudio package has been obtained.

Procedure

Unpack the DobotStudio package to a destination directory.

For example, this directory is

Installation Directory\DobotStudio

. You can install

the DobotStudio to another location based on site requirements.

In the installation directory double-click

DobotStudioSetup.exe

. The

Select Setup

Language

dialog box is displayed, as shown in Figure 2.7.

Summary of Contents for Magician Lite









































































Search results

Summary of Contents for Magician Lite

Reviews:

Related manuals for Magician Lite

Brands by name

Popular brands

Dobot Magician Lite, User Manual

Search results

Summary of Contents for Magician Lite

Reviews:

Related manuals for Magician Lite

Brands by name

Popular brands