34
250-0800-06, Version A
D I T E C H N E T W O R K S
w w w . d i t e c h n e t w o r k s . c o m
Getting Started
Packet Voice Processor Commands Manual
Example 2-4 Tab Key Navigation
PVP>signaling<tab>
<enter>
SHOW
PROFILE
POLICY
PVP>signaling profile<tab>
<enter>
SHOW
ADD
STATS
<profile-name> - {SIPProfile01,SIPProfile02,SIPProfile03,SIPProfile04}
PVP>signaling profile sipprofile01<tab>
<enter>
SHOW
SET
DEL
ENABLE
DISABLE
ROUTE
STATS
2.10 Command
Log and History
The Packet Voice Processor CLI supports a minimum of 100 command history
sessions per log in session. The UP and DOWN arrows can be used to navigate this
list.
The Packet Voice Processor logs all executed commands in persistent storage. The
commands are time stamped and provide identification of the session and the user
who initiated the command.
2.11 Autonomous
Messages
Each CLI session supports the display of autonomous messages generated by the
Packet Voice Processor. Sessions can be configured by the user to display these
messages or not to display these messages. The default setting is for autonomous
messages to be displayed. For additional information, see
“AUTOMSG Command”, on page 174
.
