DITECH Packet Voice Processor, Command Manual

Page: 158 / 175

124 250-0800-06, Version A
D I T E C H N E T W O R K S
w w w . d i t e c h n e t w o r k s . c o m
System Commands
Packet Voice Processor Commands Manual
Note While the Signaling Port can be configured for up to 200 IP Addresses, we will see
later that only 40 Signaling Profiles can be configured.
10.4.5 INTERFACE <sig-port> IP <sigip-index> DEL Command
The INTERFACE <sig-port> IP <sigip-index> DEL command deletes an IP
address represented by an index number from the signaling interface (see
Section 10.4.7 ). The required minimum access level is Write for this command. The
command syntax is as follows:
INTERFACE <sig-port> IP <sigip-index> DEL
Example 10-12 displays an example of this command and output.
Example 10-12 INTERFACE <sig-port> IP <sigip-index> DEL Command
PVP> INTERFACE SIG/0 IP 1 DEL
Done
10.4.6 INTERFACE <sig-port> IP <ip-addr> DEL Command
The INTERFACE <sig-port> IP <ip-addr> DEL command deletes an IP address
from the signaling interface. The required minimum access level is Write for this
command. The command syntax is as follows:
INTERFACE <sig-port> IP <ip-addr> DEL
Example 10-13 displays an example of this command and output.
Example 10-13 INTERFACE <sig-port> IP <ip-addr> DEL Command
PVP> INTERFACE SIG/0 IP 172.61.1.25 DEL
Done
10.4.7 INTERFACE <sig-port> IP SHOW Command
The INTERFACE <sig-port> IP SHOW command displays all IP addresses on the
signaling interface matched by an index number. The required minimum access level
is Write for this command. The command syntax is as follows:
INTERFACE <sig-port> IP SHOW
Example 10-14 displays an example of this command and output.
Example 10-14 INTERFACE <sig-port> IP SHOW Command
PVP> INTERFACE SIG/0 IP SHOW
Index IP Address Mask
1 10.62.1.237 255.255.255.0
2 10.62.1.238 255.255.255.0
3 10.62.1.239 255.255.255.0
4 10.62.1.240 255.255.255.0
5 10.62.1.241 255.255.255.0