General Commands
250-0800-06, Version A
107
D I T E C H N E T W O R K S
w w w . d i t e c h n e t w o r k s . c o m
9
Ge
neral
C
omma
nds
Packet Voice Processor Commands Manual
9.8.5 INVENTORY PERICTRLR [<perictrlr>] Command
The
INVENTORY PERICTRLR [<perictrlr>]
command reads and displays inventory
information for the Peripheral Controller(s). There are 2 Peripheral Controller
Modules for a Packet Voice Processor shelf. These Peripheral Controller Modules
are located on the back of the shelf (
).
Figure 9-4 Peripheral Controller Modules
The minimum access level for this command is Read. The command syntax is as
follows:
INVENTORY PERICTRLR [<perictrlr>]
Entering this command without an argument displays information for the 2 Peripheral
Controllers Modules. Peripheral Controller Module 1 (PERICTRLR 1) is the controller
located in the right slot when directly facing the back of the Packet Voice Processor.
Peripheral Controller Module 2 (PERICTRLR 2) is the controller located in the left slot
when directly facing the back of the Packet Voice Processor.
OOS
Alarm
Reset
H/S
Closed
Open
Telco Alarms
&
Relay
s
OOS
Alarm
Reset
H/S
Closed
Open
Telco Alarms
&
Relay
s
Maximum Torque
7.12NM (63lb/in)
