Page 4.26
Rev C April 2011
4. Controlling the projector
Digital Projection
TITAN sx+ 3D, Dual 3D, Ultra Contrast
User Manual
For important information about how Input 8 is used, see
INPUT 8 in the Notes column
, and also Section 4, Overview.
Notes
Aspect Ratio selection can be
found in both the Picture and
Geometry menus.
When User Aspect is selected,
the Aspect Ratio settings are
taken from the User H Aspect
and V Aspect settings made in
the Geometry menu.
Aspect Ratio selection is NOT
available for Input 8.
WUXGA models only:
The full height of the DMD can
be used only by WUXGA and
UXGA images.
For more information, see
Screen requirements in
section 2. Installation.
The Sharpness slider is
available for Composite,
S-Video and Component SD
inputs only.
Aspect Ratio
Press
and
to select Aspect Ratio.
Press
and
to select from:
Fill
This will best fit the incoming source to fill either the height or
width without changing the aspect ratio of the source.
User Aspect
1.33:1 (4:3)
1.6:1 (16:10)
1.78:1 (16:9)
2.35:1 (Scope)
1.66:1 (Vista)
1.85 (Flat)
Theaterscope
Use with the TheaterScope Anamorphic System only. The
2.35:1 source image is displayed using the full area of the 16:9
DMD. This is then stretched to 2.35:1 by the lens.
Native
The image will be displayed pixel for pixel. The image will be
centred, with a black border if smaller than full resolution or
cropped if larger.
Sharpness
Press
and
to select Sharpness.
Press
and
to adjust the slider.
•
•
picture menu continued
