Page 4.40
Rev C April 2011
4. Controlling the projector
Digital Projection
TITAN sx+ 3D, Dual 3D, Ultra Contrast
User Manual
For important information about how Input 8 is used, see
INPUT 8 in the Notes column
, and also Section 4, Overview.
Notes
The actual blend will be
smoother than that shown here.
Edges that have not been
selected as Active, will be
greyed out.
To see the effect of the
adjustment, turn the Overlap
Markers ON..
Input 8 is pixel-mapped directly
to the DMDs, so the image may
be smaller than full-screen.
Input 8 DVI 3D Resolution
should normally be set to
Automatic. However, if the
incoming video signal is non-
standard, the projector may not
be able to select an appropriate
input size.
In this case, set the resolution
to one of the settings provided.
(Settings larger than the DMD
will not available, depending on
model.)
This setting will have no effect
on Inputs 1–7.
Overlap markers
The markers show the extent of the overlap, and can be used as an alignment guide
when adjusting the position of the images.
Press
and
to select Overlap Markers.
Press
and
to select from:
On
Off
Overlap adjust
Used to determine the size of the overlap.
Press
and
to select the edge to be blended.
For each edge, press
and
to adjust the slider (0 to 511).
Input 8 DVI 3D resolution
Press
and
to select Input 8 DVI 3D Resolution.
Press
and
to select from:
Automatic
HD2
1280 x 720
SXGA
1280 x 1024
SX+
1400 x 1050
1080p
1920 x 1080
UXGA
1600 x 1200
WUXGA
1920 x 1200
•
•
•
•
Setup menu, projector Setup, Edge Blend continued
