Rev C April 2011
Page 5.27
Digital Projection
TITAN sx+ 3D, Dual 3D, Ultra Contrast
User Manual
5. Userware
For important information about how Input 8 is used, see
INPUT 8 in the Notes column
, and also Section 4, Overview.
Notes
The Connect page is available
only on the Standalone version
of the Userware.
The Userware can be used to
control only one projector at a
time, and only one instance can
be running at one time.
The Connect page can be
used to switch control between
multiple projectors.
More than one computer can be
used to control more than one
projector on the same network.
Connect page
To see the
Connect page
, click on
Connect
.
Refresh
Click on
Refresh
to search the network for projectors.
Any projectors previously connected, that are now no longer online, will be
marked
Unreachable
.
Connect
To connect to a projector, click on one of the
LAN IP address
es in the list, then
click on
Connect
.
or
Double click on a
LAN IP address
.
Any projector previously connected will be disconnected, and the Userware will
connect to the new projector.
The
LAN IP address
of the projector that is connected will be highlighted.
Projector Connected
will be shown at the top left of all pages, together with the
projector’s
Serial No
and
Model
.
Disconnect
To disconnect from the projector, click on
Disconnect
Projector Disconnected
will be shown at the top left.
•
•
•
•
