Rev C April 2011
Page 4.53
Digital Projection
TITAN sx+ 3D, Dual 3D, Ultra Contrast
User Manual
4. Controlling the projector
For important information about how Input 8 is used, see
INPUT 8 in the Notes column
, and also Section 4, Overview.
Gateway Mask
Press
and
to select
Gateway
Press
to open the
IP Address
control box.
Use
and
to select each number in turn.
Use
and
to adjust the number
then move to the next number.
Use
and
to select from
Apply
Press
to apply the new IP Address.
or Cancel
Press
or
to exit without making the change.
Wifi Channel
Press
and
to select Wifi Channel.
Press
to open the Wifi Channel control box.
Press
and
to select the channel number.
Use
and
to adjust the channel number from:
0 to 14
Use
and
to select from
Apply
Press
to apply the new Wifi Channel number.
or Cancel
Press
or
to exit without making the change.
SSID
Projector’s ID - for information only.
•
•
•
Setup menu, Network continued
Notes
IP Gateway cannot be changed
if DHCP is set to ON.
DHCP will set the the gateway
mask, which will be displayed
for information only.
The Wifi Channel setting is not
available if Connection is set to
Wired.
