Page 4.60
Rev C April 2011
4. Controlling the projector
Digital Projection
TITAN sx+ 3D, Dual 3D, Ultra Contrast
User Manual
For important information about how Input 8 is used, see
INPUT 8 in the Notes column
, and also Section 4, Overview.
Notes
Restore Defaults will restore
all settings to factory
defaults. All ISF settings will
be lost (see next page).
If you are not sure this is
what you want to do, then
either:
make a record of all settings
first
or
select
No
, then press
.
Following a restore to factory
defaults, the projector will
perform a self-test and enter
Standby mode.
This process will take up to 10
seconds. During this time the
projector will not respond to any
commands.
When complete, all settings will
be restored to factory condition
and all user settings will be
removed except for downloaded
colour and gamma parameters.
Restore Defaults
Press
and
to select Restore Defaults.
Press
.
The following message will be displayed.
Press
and
to select from:
Yes
Press
to confirm your that you really wish to restore all default settings.
All settings will be restored to factory defaults.
or No
Press
or
to exit without making the change.
•
•
Setup menu, continued
