Rev C April 2011
Page 4.9
Digital Projection
TITAN sx+ 3D, Dual 3D, Ultra Contrast
User Manual
4. Controlling the projector
For important information about how Input 8 is used, see
INPUT 8 in the Notes column
, and also Section 4, Overview.
Notes
There are more indicators on
the Control panel, and these are
described on the next page.
Input 8 and 3D may not be
present on some models
Indicators
Input status indicators
The indicator next to each input connector on the rear input panel will light as
follows:
off
= input not selected
green
= input selected, signal detected and in range
flashing green
= input selected, but signal
not
detected or out of range
The indicator next to each input connector on the front input panel will light as
follows:
off
= input not selected
green
= input selected, signal detected and in range
flashing green
= input selected, but signal
not
detected or out of range
5. Composite Video
6. S-Video
7. Component
1. RGB1
2. RGB2
3. DVI
4. SDI
8. DVI:
MAIN
SUB
3D Sync OUT
3D Sync IN
