Page 4.32
Rev C April 2011
4. Controlling the projector
Digital Projection
TITAN sx+ 3D, Dual 3D, Ultra Contrast
User Manual
For important information about how Input 8 is used, see
INPUT 8 in the Notes column
, and also Section 4, Overview.
Notes
Read the notes on Colour and
Global Colourimetry earlier
in this section before making
any settings in the Colour
menus.
Note that any changes made
in the Global Colourimetry
menu (see Setup Menu, later
in this section) will affect ALL
inputs, modes and presets for
which Global Mode has been
selected in the Colour menu.
The Colour Temperature
slider is available only if
Temperature Mode is selected.
The RGB Lift and Gain sliders
are available only if User Mode
is selected.
The Component Type
selection is available for RGB1
and Component inputs only.
Colour Mode
Press
and
to select Colour Mode.
Press
and
to select from:
Global
Temperature
User
Peak
Video
Film
Graphic
ColorMAX User 1
ColorMAX User 2
Colour Temperature
Press
and
to select Temperature.
Press
and
to adjust the slider (3,000K to 10,000K. in 100 steps).
RGB Lift
Press
and
to select the parameter to be adjusted.
Press
and
to adjust the slider.
RGB Gain
Press
and
to select the parameter to be adjusted.
Press
and
to adjust the slider.
Component Type
Press
and
to select Component Type.
Press
and
to select from:
RGB
YPrPb
•
•
•
•
•
Colour menu continued
