Rev C April 2011
Page 5.7
Digital Projection
TITAN sx+ 3D, Dual 3D, Ultra Contrast
User Manual
5. Userware
For important information about how Input 8 is used, see
INPUT 8 in the Notes column
, and also Section 4, Overview.
Input Presets
recall
To recall a set of modal and lens* settings that have been saved:
Click on
Preset
, and select one of the Presets
A - S
, from the drop down menu.
Click on
Recall
.
The projector will switch to the saved input source, and redetect the input mode
before applying the saved modal and lens* settings.
Save
To save the current input source, mode, modal and lens* settings:
Click on
Preset
, and select one of the Presets
A - S
, from the drop down menu.
Click on
Save
.
The settings will be saved to the selected preset.
•
•
•
•
Notes
For more information about
input modes and input presets,
see Overview, in section
4. Controlling the Projector.
A preset can be applied only to
the same mode for which it was
created. If the detected input
mode does not match, then
settings from the mode history
or mode library will be applied
instead.
For more information about
input modes, see Overview,
in section 4. Controlling the
Projector.
The lens settings, ie Focus
position, Zoom position and
Shift, are included only for the
first ten presets.
Presets can also be deleted:
see Input menu, in section
4. Controlling the Projector.
Show page continued
Preset
