Digital Projection HIGHlite 5000GV, User Manual

Page: 61 / 94

Clock - Used to fine tune the computer image or to remove any vertical banding
that might appear.
Phase - Adjusts the clock phase or used to reduce video noise, dot interference or
cross talk. (this is evident when part of your image appears to be shimmering). The
Phase should only be adjusted after the Clock parameter has been defined.
RESOLUTION
When Auto Adjust is turned off, Resolution allows you to activate or deactivate the
Imaging Resizing feature . There are three possible settings - Auto, Native and
Native with Zoom.
Auto - Turns on the Imaging Resizing feature. The projector automatically reduces
or enlarges the current image to fit the full screen.
Native - Turns off the Imaging Resizing feature. The projector displays the current
image in its true resolution.
If you are displaying an image with higher resolution than the projector’s native
resolution, even in Native mode, the image is displayed full screen using the
Advanced AccuBlend feature.
Native with Zoom - Zooms the image to fill the screen in the Native mode.
When using Native with Zoom, unless the projector is used at 0° of lens offset the
image may require re-positioning.
C—17
System Operation
OPERATION
LBV00063; Revision A - 01/02/2000
✍
✍