Digital Projection HIGHlite 5000GV, User Manual

Page: 23 / 94

connection should be attached to the external equipment such as PC. The OUT
connection provides for daisy-chaining multiple projectors and operating them with
the same external equipment. To daisy-chain projectors, connect the IN terminal of
the second projector to the OUT connection of the first projector. A third projector
would be connected to the second projector in the same manner and the procedure
would be repeated until all the projectors are connected.
3 - REMOTE 1
This Mini D-Sub 15 pin terminal allows external control of the projector from either
an ISS-6020 switcher or from an external control source. When the switcher is used,
connect to the REMOTE 1 terminal on the back of the switcher.
4 - REMOTE 2
The IN connector allows direct connection of the remote control unit. The OUT
connector is used for daisy-chaining multiple projectors and operating them with the
same remote control.
5 - INPUT 1 (RGB1) and INPUT 2 (RGB2)
Inputs with BNC terminals for connection of R, G, B, H and V outputs of external
equipment such as a switcher. If using a source with combined sync output, connect
it to the H/V terminal. The R, G, B terminals can also be used to connect component
video outputs (Y/Cb/Cr) of external equipment.
6 - INPUT 4 (Component (YCrCb))
Inputs with RCA terminals for component video outputs (Y/Cb/Cr) of external
equipment such as DVD player.
This input accepts component signals only.
7 - INPUT 5 (VIDEO 1)
BNC composite video connection for external equipment such as a VCR or laser
disk player.
A—11
Overview
OVERVIEW
LBV00063; Revision A - 01/02/2000
✍