Digital Projection HIGHlite 5000GV, User Manual

Page: 15 / 94

gas, and will not cause harm if kept out of your eyes. If your eyes have been
exposed to this gas, please flush your eyes out with water immediately and seek
immediate medical attention. Do not rub your eyes as this could cause
serious injury.
WARNING: Do not look into the lens while the projector is on. Serious damage to
your eyes could result.
CAUTION: The high pressure lamp may explode if improperly handled. Refer all
servicing to qualified service personnel.
Power Supply
The projector is designed to operate on a power supply of 1.0kW 100-120VAC /
1.5kW 200-240VAC 50/60Hz. Ensure that your power supply fits this requirement
before attempting to use your projector.
Handle the power cable carefully and avoid excessive bending. A damaged cord can
cause electric shock or fire.
Running the power cord and the RGB cable close to each other can cause beat
noise. If this happens, keep the two separated so that beat noise is not generated.
If the projector is not be used for an extended period of time, disconnect the plug
from the power outlet. Do not unplug the power cable from the wall outlet under the
following circumstances, doing so may cause damage to the projector:
a) Immediately after the power cable is plugged into the wall outlet (the POWER
indicator has not changed to a steady amber glow).
b) Immediately after the lamp has been switched off. After the projector is turned
off with the POWER OFF button the cooling fan continues to operate for 3
minutes while the Two Digit INDICATOR "--" flashes.
c) While the hour glass icon or the message ‘Please wait a litttle’ is being displayed.
A—3
Overview
OVERVIEW
LBV00063; Revision A - 01/02/2000