Digital Projection HIGHlite 5000GV, User Manual

Page: 56 / 94

Entry List
The Entry List window contains a list of all current and previously connected input
signals.
ENTRY EDIT COMMAND
The names and positions of the signals stored in the entry list can be modified using
the Entry Edit Command. To display the Entry Edit Command window hold down
CTL and press ENTER on the remote control. You can then Cut, Copy, Paste and
Edit the entries.
Cut - allows you to remove a selected signal from the list. The selected signal is
stored on the ‘clipboard’ in the projector.
Copy - copies the selected signal from the list and stores it on the ‘clipboard’.
Paste - Enables you to paste the signal stored on the ‘clip-board’ to any other line of
the list. To do this, select Paste and then select the line number you want to paste to
and press ENTER.
Edit - allows you to change source name or assign the direct key.
C—12
System Operation
OPERATION
LBV00063; Revision A - 01/02/2000