Digital Projection HIGHlite 5000GV, User Manual

Page: 14 / 94

The safety instructions provided in this manual are to ensure the long life of your
projector and to prevent fire and shock. Please read them carefully and heed all
warnings.
Fire and Shock Precautions
Ensure that there is sufficient ventilation and that vents are unobstructed to prevent
potentially dangerous concentrations of ozone and the build-up of heat inside your
projector. Allow at least 20cm (8”) of space between your projector and a wall.
Allow at least 50cm (20”) of space between the ventilation duct outlet and object.
Ensure that nothing can be spilled on, or dropped inside the projector. If this does
happen, switch off and unplug the mains supply immediately. Do not operate the
projector again until it has been checked by qualified service personnel.
Do not insert any metal objects such as a wire or screwdriver into your projector.
Lamp Precautions
Due to the lamp being sealed in a pressurised environment, there is a small risk of
explosion, if not operated correctly. There is minimal risk involved, if the unit is in
proper working order, but if damaged or operated beyond the recommended 1500
hours, the risk of explosion increases.
The projector has a warning system that displays the following message when you
reach 1500 hours of operation - Lamp Running Time is Over 1500 Hours!!. When
you see this message please contact your Digital Projection dealer for a
replacement lamp.
A—2
Overview
Safety Advice
OVERVIEW
LBV00063; Revision A - 01/02/2000