Digital Projection HIGHlite 5000GV, User Manual

Page: 55 / 94

Source Select enables you to select an input source connected to the projector.
To select an input source use the up/down buttons on your remote control or the
projector cabinet to highlight the desired input type and press Enter. Available
options include: RGB1, RGB2, RGB3, Component (YCbCr), Video1, Video2,
S-Video1, S-Video2, RGB Digital or SDI.
Alternatively Entry List may be selected which contains a list of the entry signals.
When in the Entry List window, use the up/down buttons on your remote control or
the projector cabinet to select the desired signal and press the Enter button.
When switcher control is turned on selecting Source Select will provide you with
options of selecting a Switcher input or selecting a signal from the Entry List.
C—11
System Operation
Source Select
OPERATION
LBV00063; Revision A - 01/02/2000