Digital Projection HIGHlite 5000GV, User Manual

Page: 41 / 94

CONNECTING A VIDEO RECORDER OR LASER DISC PLAYER
Video recorders and laser disc player connect to the HIGHlite 5000GV Projector using
common RCA cables (not provided). To make these connections, simply:
1. Turn off the power to your projector and video recorder or laser disc player.
2. Connect one end of your RCA cable to the video output connector on the back
of your video recorder or laser disc player and the other end to the Video input
on your projector.
3. Turn on the projector and the VCR or laser disc player.
Refer to your VCR or laser disc player owner's manual for more information
about your equipment's video output requirements.
CONNECTING A COMPUTER
Connecting your PC or Macintosh computer to the HIGHlite 5000GV Projector will
enable you to project your computer's screen image for an impressive presentation.
To connect to a computer:
1. Turn off the power to your projector and computer.
2. Use the signal cable supplied with the PC or Macintosh computer to connect to
the projector.
3. Turn on the projector and the computer.
If the projector goes blank after a period of inactivity, it may be caused by a
screen saver installed on the computer.
B—13
System Installation
Connecting Signal Sources
INSTALLATION
LBV00063; Revision A - 01/02/2000
✍
✍