manualshive.com logo in svg

Digital Projection HIGHlite 5000GV, User Manual

Share
Download
Digital Projection HIGHlite 5000GV User Manual Download Page 63

Switcher

This feature is only available when used with ISS-6020.

R/G/B GAIN

This feature adjusts the red, green and blue input levels of the signal.

VOLUME

This feature adjusts the volume of the audio output. Adjust the sound corresponding

to the appropriate slot.

Keystone

Keystone is the distortion of a projected image that usually creates a wider top than

bottom. Aiming a projector upward on a wall rather than straight at a wall creates

this distortion. Use slide bar to correct this keystone (trapezoidal) distortion.

With the projector aimed directly at the screen the maximum keystone angle that

can be corrected is ±15 degrees.

Reference White Balance

Reference White Balance is only available when viewing test patterns and adjusts

the white balance that is used as a reference.

Any adjustment will affect the displayed image for all input sources.

C—19

System Operation

OPERATION

LBV00063; Revision A - 01/02/2000

✍

✍

Summary of Contents for HIGHlite 5000GV































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands