Digital Projection HIGHlite 5000GV, User Manual

Page: 26 / 94

Remote Control
All the functions of the HIGHlite 5000GV can be controlled using the remote control.
The remote control can operate either by infra red or by a direct connection to the
projector via a hard wire connection.
When using infra red operation the remote control has an effective range of about
7m (23 feet) and at an angle of 30° above, below, to the left and to the right of the
remote control sensors located at the front and the rear of the projector. If the
remote control is not going to be used for a long period the batteries should be
removed.
Do not expose the remote control to heat, steam, water or other liquid. If the remote
control gets wet, wipe it dry immediately.
When remote control buttons are pressed and held, main unit function keys may
not operate.
You cannot operate the projector using the remote control if the remote ID is not
set to [00] or the remote ID is not the same as the projector ID.
Very bright flourescent lighting or Infra Red translation systems may saturate the
projectors’ Infra Red receiver rendering the remote control inoperative.
A—14
Overview
OVERVIEW
LBV00063; Revision A - 01/02/2000
✍
✍
✍