Digital Projection HIGHlite 5000GV, User Manual

Page: 48 / 94

15 - PIXEL
Displays the Pixel Adjust screen to allow adjustment of the pixel clock and phase.
16 - AUTO
Adjusts the Horizontal/Vertical Position and Pixel Clock/Phase for an optimum
picture.
17 - POSITION
Pressing this button once will display the Blanking screen, pressing it again will
display the Position screen. While pressing and holding CTL, pressing Position
displays the Lens Shift adjustment screen.
18 - MUTE SOUND
Mute Sound toggles the sound on and off when used in conjunction with the ISS-
6020 or IPS4000.
19 - MUTE OSD
This button turns on and off the On Screen Display.
You can also toggle the on-screen display on and off by pressing and holding
CTL and then pressing MUTE OSD. In this case any adjustment will still change
the projector's memory settings. This mode is available even when an input is
switched to another or the power is turned off using the POWER OFF button on
the remote control.
20 - MUTE PICTURE
Pressing Mute Picture toggles the display between the incoming signal and a blank
screen. Pressing and holding CTL and pressing this button activates the shutter and
shuts off the light completely.
21 - KEYSTONE (R)
Display the Keystone Correction screen.
22 - AMPLITUDE (G)
For use by authorised service personnel only.
C—4
System Operation
OPERATION
LBV00063; Revision A - 01/02/2000
✍