Digital Projection HIGHlite 5000GV User Manual Download

Page: 17 / 94

Pre-Installation Check

Before mounting the projector in its intended location, the following pre-installation

routine must be performed:

1. Install the AC Power Lead

2. Install the projector lens.

2. Ensure all the air flow inlet and outlet ducts are clear from obstruction.

3. Switch on the projector and wait for approximately 30 seconds.

4. Insert batteries into the remote control unit (see overleaf).

5. With the screen or a wall illuminated, confirm the Menu System is operational

by pressing MENU on remote control.

6. Power down the projector and disconnect from the mains supply.

7. Continue with the system installation.

A—5

0verview

Initial Preparation

OVERVIEW

LBV00063; Revision A - 01/02/2000

Summary of Contents for HIGHlite 5000GV































































































Search results

Summary of Contents for HIGHlite 5000GV

Reviews:

Related manuals for HIGHlite 5000GV

Brands by name

Popular brands

Digital Projection HIGHlite 5000GV, User Manual

Search results

Summary of Contents for HIGHlite 5000GV

Reviews:

Related manuals for HIGHlite 5000GV

Brands by name

Popular brands