Digital Projection HIGHlite 5000GV, User Manual

Page: 75 / 94

SETUP PAGE 3
Power Management - This feature automatically turns the projector off if there is
no RGB input for over five minutes. Power Management is not active for video
signals.
Power Off Confirmation - Determines whether a confirmation dialogue is
displayed when turning the projector off.
Keystone Save - Enables the current keystone settings to be saved. The keystone
setting is global and affects all sources if it is saved when the projector is switched
off.
User Name - An 18 character user name may be assigned to the projector using the
alpha-numeric INPUT keys on the remote control. The cursor keys allow movement
through the character entry field. To save the name, press the ENTER button.
Sync Termination - Defines the impedance of the sync signal for the RGB1 and
RGB2 inputs. The default setting for normal use is 75
Ω
. Hi-Z should be selected
when using a TTL signal.
Projector ID - Each projector requires a unique address when used in serial
communication mode. Up to 64 addresses are available by selecting Enable and
then using the right cursor to increase the ID number. To save the setting, select
OK.
C—31
System Operation
OPERATION
LBV00063; Revision A - 01/02/2000