Digital Equipment StorageWorks UltraSCSI DS-BA370 Series, User Manual

Page: 135 / 186

Power Distribution
UltraSCSI RAID Enclosure 6–15
Complete the procedure in Table 6–4 to remove an ac power controller.
Table 6–4 Removing an AC Input Power Controller
1. Press
O
on the ON/OFF switch.
2. Disconnect the ac power cord.
3. Loosen the two retaining screws.
CXO-5186A-MC
1
0
1
0
AC Power Entry
Controller A
ON/OFF
Switch
AC Input
Power Cord
Retaining
Screw (2X)
4. Remove the power controller from the UltraSCSI RAID enclosure
and either place in on an electrostatic mat or place it in an
electrostatic bag.