Digital Equipment StorageWorks UltraSCSI DS-BA370 Series, User Manual

Page: 110 / 186

Single-Ended I/O Modules
5–14 UltraSCSI RAID Enclosure
Table 5–6 Installing Three Enclosure System Cables (Continued)
6. On an expansion I/O module, align the Cable A with the left
connector. Gently insert the cable connector into module connector.
Tighten both cable connector thumb screws to fully seat the
connector.
Install a wire tie through the holes on the cable support bracket and
around the cable. Tighten the wire tie.
CXO5841A
6 4 2
5 3 1
6 4 2
5 3 1
6 4 2
5 3 1
Cable A
Cable B
7. Align the Cable B connector with the right connector. Gently insert
the cable connector into module connector. Tighten both cable
connector thumb screws to fully seat the connector.
Install a wire tie through the holes on the cable support bracket and
around the cable. Tighten the wire tie.
CXO5855A
Cable B
8. Align the Cable B connector with the left connector on the other I/O
module. Gently insert the cable connector into module connector.
Tighten both cable connector thumb screws to fully seat the
connector.