Digital Equipment Prioris XL 6000 Series, Service Maintenance Manual, Page: 68 / 174

Installing Disk and Tape Drives
6-7
PRIO
RIS
XL
6000
Expansion Brackets
You can install a 3½-inch half-height device in the front access drive bay. If you
plan to install a 3½-inch device in a 5¼-inch drive bay slot, you must first install
the 3½-inch expansion brackets onto the device and then install the 5¼-inch
brackets as shown in Figure 6-2. 3½-inch expansion brackets (74-44336-01) are
either supplied with the device or can be purchased from Digital. Contact your
local Digital sales representative for additional information. Afterwards, install
the 3½-inch device following the procedures described in “Installing a 5¼-Inch
Device into the Front Access Drive Bay.”
DEC00723
Figure 6-2. Installing Expansion Brackets