Digital Equipment Prioris XL 6000 Series, Service Maintenance Manual, Page: 66 / 174

Installing Disk and Tape Drives
6-5
PRIO
RIS
XL
6000
Installing a 5¼-Inch Device into the Front Access Drive Bay
To install a 5¼-inch device into the front access drive bay slot, perform the
following:
1. Turn off your server.
2. Disconnect all external devices, ac power, and monitor power.
3. Unlock and remove the side panel.
4. Open the door.
5. Remove the plastic filler panel by pushing it out from inside the server.
6. Remove the bracket from the drive bay (inside, right) and attach it to the
device.
7. Insert the device into the drive bay slot from the front.
8. Secure the device to the slot using the supplied mounting screws.
9. If applicable, replace the plastic filler panel.