Digisol DG-GS4826S, Management Manual

Page: 1103 / 1344

C
HAPTER
45 | DHCP Commands
DHCP Server
– 1103 –
netbios-node-type
This command configures the NetBIOS node type for Microsoft DHCP
clients. Use the no form to remove the NetBIOS node type.
S
YNTAX
netbios-node-type type
no netbios-node-type
type - Specifies the NetBIOS node type:
broadcast
hybrid (recommended)
mixed
peer-to-peer
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
DHCP Pool Configuration
E
XAMPLE
Console(config-dhcp)#netbios-node-type hybrid
Console(config-dhcp)#
R
ELATED
C
OMMANDS
netbios-name-server (1102)
network
This command configures the subnet number and mask for a DHCP address
pool. Use the no form to remove the subnet number and mask.
S
YNTAX
network network-number [ mask ]
no network
network-number - The IP address of the DHCP address pool.
mask - The bit combination that identifies the network (or subnet)
and the host portion of the DHCP address pool.
C
OMMAND
M
ODE
DHCP Pool Configuration
U
SAGE
G
UIDELINES
u
When a client request is received, the switch first checks for a network
address pool matching the gateway where the request originated (i.e.,
if the request was forwarded by a relay server). If there is no gateway
in the client request (i.e., the request was not forwarded by a relay