Digisol DG-GS4826S, Management Manual

Page: 1126 / 1344

C
HAPTER
47 | IP Interface Commands
IPv4 Interface
– 1126 –
u
End stations that require Proxy ARP must view the entire network as a
single network. These nodes must therefore use a smaller subnet mask
than that used by the router or other relevant network devices.
u
Extensive use of Proxy ARP can degrade router performance because it
may lead to increased ARP traffic and increased search time for larger
ARP address tables.
E
XAMPLE
Console(config)#interface vlan 3
Console(config-if)#ip proxy-arp
Console(config-if)#
clear arp-cache
This command deletes all dynamic entries from the Address Resolution
Protocol (ARP) cache.
C
OMMAND
M
ODE
Privileged Exec
E
XAMPLE
This example clears all dynamic entries in the ARP cache.
Console#clear arp-cache
This operation will delete all the dynamic entries in ARP Cache.
Are you sure to continue this operation (y/n)?y
Console#
show arp
This command displays entries in the Address Resolution Protocol (ARP)
cache.
C
OMMAND
M
ODE
Normal Exec, Privileged Exec
C
OMMAND
U
SAGE
This command displays information about the ARP cache. The first line
shows the cache timeout. It also shows each cache entry, including the IP
address, MAC address, type (static, dynamic, other), and VLAN interface.
Note that entry type “other” indicates local addresses for this router.